LOWR
Removing the drive shaft
1. Remove the drive shaft assembly and
pinion, and then pull out the forward
gear.
Drive shaft holder 5 1: 90890-06519
Pinion nut holder 2: 90890-06505
Socket adapter 2 3: 90890-06507
Disassembling the drive shaft
1. Install the pinion nut 1, tighten it finger
tight, and then remove the drive shaft
bearing 2 using a press.
CAUTION:
• Do not press the drive shaft threads a
directly.
• Do not reuse the bearing, always
replace it with a new one.
Bearing inner race attachment 3:
90890-06639
6-45
Lower unit
S60C6190
Disassembling the forward gear
1. Remove the taper roller bearing from the
forward gear using a press.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Bearing separator 1: 90890-06534
2. Remove the needle bearing from the for-
ward gear.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Stopper guide plate 2: 90890-06501
Stopper guide stand 3:
90890-06538
Bearing puller 4: 90890-06535
Bearing puller claw 2 5:
90890-06537
S60C6525
60C5D11