Removing The Drive Shaft; Disassembling The Drive Shaft Housing; Disassembling The Forward Gear - Yamaha F100C Service Manual

LOWR

Removing the drive shaft

1. Remove the drive shaft assembly and
pinion, and then pull out the forward
gear.
Drive shaft holder 5 1: 90890-06519
Pinion nut holder 2: 90890-06505
Socket adapter 2 3: 90890-06507
Disassembling the drive shaft
housing
1. Remove the cover, oil seals, and needle
bearing.
Needle bearing attachment 1:
90890-06610
Driver rod L3 2: 90890-06652
6-17
Lower unit
S60C6190

Disassembling the forward gear

1. Remove the taper roller bearing from the
forward gear using a press.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Bearing separator 1: 90890-06534
Bearing inner race attachment 2:
90890-06641
2. Remove the needle bearing from the for-
ward gear.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Stopper guide plate 3: 90890-06501
Stopper guide stand 4:
90890-06538
Bearing puller 5: 90890-06535
Bearing puller claw 1 6:
90890-06536
S60C6200
60C5D11