Ignition System Operations; Electronic Ignition System Replacement - Weber 300 Owner's Manual

Hide thumbs Also See for 300:

Table of Contents

Q300

IGNITION SYSTEM OPERATIONS

If the ignition system fails to ignite the burners, then check the igniter.

•

Check that both ignition wires are attached properly to igniter electrodes(1).

•

Check that the ignition button pushes in, and returns to the out position.

If the ignition system still fails to light, contact the Customer Service

Representative in your area using the contact information on our

web site. Log onto www.weber.com

Q320

IGNITION SYSTEM OPERATIONS

If the electronic ignition system fails to ignite the outside burner, light the outside

burner with a match. If the outside burner lights with a match, then check the

Electronic Ignition System.

•

Check that both of the ignition wires are attached properly to the igniter

electrodes (1) on the ignition module.

•

Check that the Electronic Ignition Button is working by listening and looking

for sparks at the outside burner.

REPLACE BATTERY IF NECESSARY

AAA alkaline battery only. See illustration:

If the Electronic Ignition System still fails to light, contact the

Customer Service Representative in your area using the contact

information on our web site. Log onto www.weber.com

If replacement of the ignition module is necessary it must be removed and disposed

of properly. Please see back page for further information on proper disposal.

MAINTENANCE

(1)

Table of Contents

320