Main Burner Flame Pattern; Main Burner Cleaning Procedure - Weber 300 Owner's Manual

Hide thumbs Also See for 300:

Table of Contents

MAIN BURNER FLAME PATTERN

The Weber

gas barbecue burners have been factory set for the correct air and gas

mixture. The correct ﬂ ame pattern is shown.

1) Burner tube

2) Tips occasionally ﬂ icker yellow

3) Light blue

4) Dark blue

If the ﬂ ames do not appear to be uniform throughout the burner tube, follow the burner

cleaning procedures.

Turn off the gas supply. Remove burners ﬁ rst (See section - Replacing Main Burners).

Look inside each burner with a ﬂ ashlight. Clean the inside of the burners with a wire (a

straightened-out coat hanger will work). Check and clean the air shutter opening at the

ends of the burners. Check and clean the valve oriﬁ ces at the base of the burner oriﬁ ce

(5). Use a Steel bristle brush to clean outside of burners. This is to make sure all the

burner ports are fully open.

CAUTION: Do not enlarge the burner ports when cleaning.

MAINTENANCE

(5)

Table of Contents

320