Vitocell 100-W, Adjacent (Type Cvua - 300 Litre, White Finish), Made From Steel With Ceraprotect Enamel Coating, For Dual Mode Dhw Heating - Viessmann VITOLADENS 300-W Technical Manual

Separate DHW cylinder for the Vitoladens 300-W
3.6 Vitocell 100-W, adjacent (type CVUA – 300 litre, white finish), made from steel with
Ceraprotect enamel coating, for dual mode DHW heating
■ Adjacent
■ Made from steel, with Ceraprotect enamel coating and internal indi-
rect coils
■ for dual mode DHW heating
■ with Solar-Divicon, integral pipework and solar control module, type
SM1.
For further technical details, see separate datasheet for the Vitocell 100-U.
Capacity
DIN register no.
Connections
Heating water flow and return
DHW and cold water
DHW circulation
Permiss. operating pressure
– heating water, solar and DHW side
Permiss. temperatures
3
– heating water side
– solar side
– DHW side
Standby heat loss (standard parameter)
q at 45 K temp. differential
BS
Dimensions
Length (Ø)
Width
Height
Height when tilted
Weight including thermal insulation
Total weight in operation
VA
TH
TE
A
SPR2
E Drain
HR Heating water return
(upper indirect coil)
HRs Heating water return, solar (lower indirect coil; fit the cylinder
temperature sensor into the solar heating water return (HRs)
using the threaded elbow with sensor well SPR2 from the
standard delivery)
HV Heating water flow (upper indirect coil)
HVs Heating water flow, solar (lower indirect coil)
KW Cold water
VIESMANN
24
l
R
R
R
bar
ºC
ºC
ºC
kWh/24 h
mm
mm
mm
mm
kg
kg
WW/HVs/HRs
HV/SPR1
Z
HR
KW/E
(cont.)
b
343
HVs
SPR1 Cylinder temperature control sensor
SPR2 Solar thermal system cylinder temperature sensor
TE Sensor well for lower thermometer
TH Thermometer
VA Protective magnesium anode
WW DHW to the pipework
Z DHW circulation
A Lower indirect coil (solar)
The connections HVs and HRs are located at the top of the
DHW cylinder
VITOLADENS 300-W/VITOLADENS 333-F
300
0266/07-13 MC/E
1
1
1
10
160
110
95
1.00
631
780
1705
1790
179
481