Vitocell 100-W, Adjacent (Type Cvb - 300 And 400 Litre, White Finish), Made From Steel With Ceraprotect Enamel Coating, For Dual Mode Dhw Heating - Viessmann VITOLADENS 300-W Technical Manual

Separate DHW cylinder for the Vitoladens 300-W
3.5 Vitocell 100-W, adjacent (type CVB – 300 and 400 litre, white finish), made from steel
with Ceraprotect enamel coating, for dual mode DHW heating
■ Adjacent
■ made from steel, with Ceraprotect enamel coating and internal indi-
rect coils
■ for dual-mode DHW heating
For further technical details, see separate datasheet for the Vitocell 100-B.
Contents l
DIN register no.
Connections
Heating water flow and R
return
DHW and cold water R
DHW circulation R
Permiss. operating
pressure
heating water, solar and
DHW side bar
Permiss. temperatures
– heating water side °C
– solar side °C
– DHW side °C
Standby heat loss q at kWh/
BS
24 h
45 K temperature differ-
ential (standard parame-
ter)
Dimensions
Length c (7) mm
Width a mm
Height m mm
Weight kg
VA
WW
TH
HV/SPR1
Z
ELH
HR
HVs/SPR2
BÖ
HRs
KW/E
E Drain
ELH Connections for immersion heater
HR Heating water return of the boiler
HR Heating water return of the solar thermal system
s
HV Heating water flow of the boiler
HV Heating water flow of the solar thermal system
s
KW Cold water
BÖ Inspection and cleaning aperture
VITOLADENS 300-W/VITOLADENS 333-F
(cont.)
300
0242/06-13 MC/E
1"
1"
1"
10
160
160
95
1.00
633
705
1746
160
c
b
SPR1 Sensor well for cylinder temperature sensor or control thermo-
stat
SPR2 Temperature sensors/thermometer
TH Thermometer
VA Protective magnesium anode
WW DHW
Z DHW circulation
400
1"
1¼"
1"
10
160
160
95
1.08
850
918
1630
167
SPR1/
SPR2
VIESMANN
3
21