Reset Configuration Data; Resources Controlled By - Transcend TS-ALR4 User Manual

3.8 PnP/PCI Configurations

• Reset Configuration Data

Normally, you leave this field on "Disabled". Select "Enabled" to reset Extended System
Configuration Data (ESCD), if you have just installed a new add-on card and the system
reconfiguration has caused such a serious conflict that the operating system cannot boot.
The setting will automatically be set back to "Disabled" when the system reboots.

• Resources Controlled By

The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play
(PnP) compatible devices. If you select "Auto(ESCD)", all of the Interrupt Requests (IRQs)
and DMA assignment fields will be deactived as the BIOS automatically assigns them.
BIOS SETUP
42