Table of Contents
Advertisement
HARDWARE INSTALLATION
Power LED Lead (3-pin POWER LED)
This 3-pin connector attaches to the power LED.
Pin1 :
+5V
Pin3 :
NC
Pin5 :
GND
Speaker Lead (4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker.
Pin13 :
Pin15 : GND
Pin17 :
Pin19 : SPK
Harddisk LED Lead (2-pin HD_LED)
This 2-pin connector connects to the LED of the hard disk. The LED lights up when the HDD is
active.
Pin6 :
+5V
Pin8 :
GND
Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without turning off your power switch.
Pin14 : RESET
Pin16 : GND
Software Power-Off Lead (2-pin SOFT_OFF)
Attach the SOFT_OFF Switch of the panel to this connector.
Pin18 : SOFT-OFF
Pin20 : GND
+5V
NC
16
Advertisement
Table of Contents
