Transcend TS-ALR4 User Manual page 31

• Floppy Mode 3 Support
Supports some particular Japanese floppy drives ( 3.5 inch drives with 1.2 MB capacity ).
• Video
Select the type of primary video subsystem in your computer. The BIOS will detect the
correct video type automatically. The BIOS supports a secondary video subsystem, but do
not select it in this Setup.
- EGA/VGA : Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SEGA,
SVGA or PGA monitor adapters.
- CGA 40 : Color Graphics Adapter, powers up in 40-column mode.
- CGA 80 : Color Graphics Adapter, powers up in 80-column mode.
- MONO : Monochrome adapter, including high resolution.
• Halt On
During the Power On Self Test (POST), the computer stops if the BIOS detects a hardware
error. You can set the BIOS to ignore certain errors during POST and continue the boot-up
process. The followings are the selections.
- All Errors : If the BIOS detects any non-fatal errors, POST stops and prompts you
to take corrective action.
- No Errors : POST does not stop for any error.
- All, But Keyboard : If the BIOS detects any non-fatal errors except keyboard, POST
stops and prompts you to take corrective action.
BIOS SETUP
26