Checking Dpf Muffler; Checking Brake Pedal; Checking Gauges, Meter And Easy Checker(Tm); Checking Head Light, Turn Signal / Hazard Light Etc - Kubota M100GX Operator's Manual

BChecking DPF Muffler
To avoid personal injury:
A Before checking or cleaning the DPF muffler,
stop the engine and wait long enough until it is
cooled down.
Check the DPF muffler and its surroundings for build-up
of anything flammable. Otherwise a fire may result.
(1) DPF muffler
BChecking Brake Pedal
To avoid personal injury:
A Be sure brake pedals have equal adjustment
when using locked together. Incorrect or
unequal brake pedal adjustment can cause the
tractor to swerve or roll-over.
1. Inspect the brake pedals for free travel, and smooth
operation.
2. Adjust if incorrect measurement is found:
(See "Adjusting Brake Pedal" in "EVERY 100 HOURS"
in "PERIODIC SERVICE" section.)
BChecking Gauges, Meter and Easy
Checker(TM)
1. Inspect the instrument panel for broken gauge(s),
meter(s) and Easy Checker(TM).
2. Replace if broken.
BChecking Head Light, Turn Signal / Hazard
Light etc.
1. Inspect the lights for broken bulbs and lenses.
2. Replace if broken.
BChecking Seat Belt
1. Always check condition of seat belt attaching
hardware before operating tractor.
2. Replace if damaged.
BChecking Movable Parts
If any of the movable parts, such as levers and pedals, is
not smoothly moved because of rust or anything sticky, do
not attempt to force it into motion.
In the above case, remove the rust or the sticky thing, and
apply oil or grease on the relevant spot.
Otherwise, the machine may get damaged.
PERIODIC SERVICE 109