Rear Ballast - Kubota M100GX Operator's Manual

BRear Ballast
Add weight to rear wheels if needed to improve traction or
for stability. The amount of rear ballast should be matched
to job and the ballast should be removed when it is not
needed.
The weight should be added to the tractor in the form of
liquid ballast, rear wheel weights or a combination of both.
C Rear Wheel Weights (option)
The rear wheel weights can be attached to the rear wheel.
See your implement operator's manual for required
number of weights or consult your local KUBOTA Dealer
to use.
(1) Rear wheel weights
A Do not overload tires.
A Add no more weight than indicated in chart.
Maximum weight
per wheel
[Cast iron disk]
72.5 kg x 2 pieces
[Steel disk]
72.5 kg x 3 pieces
TIRES, WHEELS AND BALLAST
C Liquid Ballast in Rear Tires
Water and calcium chloride solution provides safe
economical ballast. Used properly, it will not damage tires,
tubes or rims. The addition of calcium chloride is
recommended to prevent the water from freezing. Use of
this method of weighting the wheels has the full approval
of the tire companies. See your tire dealer for this service.
Liquid weight per tire (75 Percent filled)
480/
Tire sizes
70R34
Slush free at
-10
Solid at -30
364 kg 394 kg 359 kg 522 kg 460 kg
[Approx. 1 kg
CaCl per 4 L of
water]
Slush free at
-24
Solid at -47
381 kg 414 kg 376 kg 548 kg 483 kg
[Approx. 1.5 kg
CaCl per 4 L of
water]
Slush free at
-47
Solid at -52
405 kg 442 kg 400 kg 587 kg 514 kg
[Approx. 2.25kg
CaCl per 4 L of
water]
A Do not fill tires with water or solution more than 75% of
full capacity (to the valve stem level).
(1) Air (A) Correct-75% Air compresses like a cushion
(2) Water (B) Incorrect-100% Full Water can not be compressed
540/ 420/ 520/ 460/
65R34 85R34 70R38 85R38
89