Cleaning Evacuator Valve; Cleaning Grill, Radiator And Screen - Kubota M100GX Operator's Manual

Hide thumbs Also See for M100GX:
Table of Contents

Advertisement

3. When the coolant level is lower than "LOW" mark of
recovery tank, remove the radiator cap and check to
see that the coolant level is just below the port. If level
is low, add coolant.
(1) Recovery tank
A If the radiator cap has to be removed, follow the
caution above and securely retighten the cap.
A Use clean, fresh soft water and anti-freeze to fill the
radiator.
A If coolant should leak, consult your local KUBOTA
Dealer.
(A) "FULL"
(B) "LOW"
BCleaning Evacuator Valve
Open the evacuator valve to get rid of large particles of
dust and dirt.
(1) Evacuator valve
BCleaning Grill, Radiator and Screen
To avoid personal injury:
A Be sure to stop the engine before removing the
screen.
A The condenser and receiver become hot while
the air conditioner is running. Before checking
or cleaning them, wait long enough until they
cool down.
C Opening the panel (RH)
1. To open the panel, pull its front outward.
2. To close the panel, push it inward to get locked.
(1) Panel (RH)
PERIODIC SERVICE
107

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M110gxM126gxM135gx

Table of Contents