Tires, Wheels And Ballast; Tires; Inflation Pressure; Dual Tires - Kubota M100GX Operator's Manual

Hide thumbs Also See for M100GX:
Table of Contents

Advertisement

84

TIRES, WHEELS AND BALLAST

TIRES, WHEELS AND BALLAST

TIRES

To avoid personal injury:
A Do not attempt to mount a tire on a rim. This
should be done by a qualified person with the
proper equipment.
A Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the operator's manual.
A Do not use tires other than those approved by
KUBOTA.
A When optional different-diameter tires are fitted on the
machine, the travel speed display mode must be
changed. Otherwise the travel speed will not get
correctly displayed. Such mode switching is also
needed when the original tires are back on the
machine.
(See "SIDE DIGITAL DISPLAY" in "OPERATING THE
TRACTOR" section.)
BInflation Pressure
Though the tire pressure is factory-set to the prescribed
level, it naturally drops slowly in the course of time. Thus,
check it everyday and inflate as necessary.
A Maintain the maximum pressure in front tires, if using
a front loader or when equipped with a full load of front
weights.
Tire sizes
340/85R24
380/70R24
Front
420/70R24
380/85R24
480/70R34
540/65R34
Rear
420/85R34
520/70R38
460/85R38
BDual Tires
Dual tires are not approved.

Inflation Pressure

160 k Pa (1.6 kgf/cm )

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M110gxM126gxM135gx

Table of Contents