Cone Assembly Key Parts; Cone Assembly Parts - Tandon TM848-1 Operating And Service Manual

Qo
D. Latch the diskette lever.
E. Insert the screw that attaches the cone bracket to the cone alignment arm(see Figure 5-5).
5.4.3 Chec ks
A. Ensure that the Cone Assembly turns freely.
B. If not, reverify that the Cone Assembly has been installed correctly.
C. Insert a diskette.
D. Ensure that the diskette is clamped properly by the cone.
CONE BRACKET
SCREW
CONE ALIGNMENT ARM
0 p
Figure 5-4

Cone Assembly Key Parts

Figure 5-5

Cone Assembly Parts

5-5
E-RING A WASHER
WAVE WASHER
DISKETTE LEVER
CONE ASSY
E-RING
FLAT WASHER
WAVE WASHER
CONE BRACKET
FLAT WASHER (2)
CONE ASSEMBLY