Table of Contents
Advertisement
Section 2: Optional Equipment Set-Up
Front Chain Guard Installation
Refer to Figure 2-4:
1. Install chain guards (#1, #2 & #3) as shown in Figure
2-4, with 3/8" x 1" long carriage bolts (#4), and 3/8"
flange nuts (#5).
2. Tighten all nuts to 31 ft-lbs as indicated in the
"Torque Values Chart" on page 30.
Front Rubber Guard Installation
Refer to Figure 2-5:
1. Install center rubber guard as shown with 3/8" x 1"
long carriage bolts (#1), flat strip (#5), rubber
deflector (#6) and 3/8" flange nuts (#2).
2. Install side rubber guards as shown with 3/8" x 1"
long carriage bolts (#1), flat strips (#3), rubber
deflectors (#4) and 3/8" flange nuts (#2).
3. Tighten all 3/8" flange nuts (#2) to 31 ft-lbs as
indicated in the "Torque Values Chart for Common
Bolt Sizes" on page 30.
14
RCR1860 and RCR1872 Series Rotary Cutters 312-849M
Table of Contents
21400
21402
Front Chain Guard
Figure 2-4
Front Rubber Guard
Figure 2-5
2/03/12
Hide quick links:
Advertisement
Table of Contents
