Changing the settings of the computer alone
Pressing the MENU button with the measurement screen displayed changes to the menu
screen. Various settings can be changed on the menu screen.
* After you change the setting, be sure to press the MENU button to register it.
* Leaving the menu screen without any operation for 1 minute returns to the measurement
screen.
Menu top screen
Measurement
Clock setting
MENU
screen
(on the right of
this page)
Changing the time zone
(shortcut)
Register
the setting
When you travel back
and forth between two
regions, you can easily
return the time zone to
MENU
the original one.
* For details, see
MODE
Selecting the
speed unit
(page 35)
Setting the tire
Pairing the sensor
MODE
MODE
circumference
(page 32)
(page 31)
Press
and hold
Night-time setting
for 4 sec.
(page 34)
"Changing the time
zone" (page 30).
MODE
MODE
Entering the
Setting the
total distance
record interval
(page 34)
(page 34)
From "Selecting the speed unit" (page 35)
Clock setting
Change the settings of the time zone, daylight saving time, and the
clock display format.
* With this unit, it is not necessary to set the clock/date, since they
Changing
the settings
MODE
(press
MODE
& hold)
MODE
MODE
(press & hold)
Register
the setting
MENU
To "Setting the tire circumference" (page 31)
are synchronized after receiving GPS signal.
Time zone list
Select the code for the city nearest from
your current location.
Switch the display
MODE
* For details, see "Time zone list"
(page 11).
MODE
(press & hold)
Daylight saving time
Select whether to use the daylight saving
time.
ON
Moves the clock 1 hour ahead
OFF Displays in regular clock
ON ↔ OFF
MODE
MODE
(press
& hold)
MODE
Clock display format
Select the display format of "12h" (12
hours display) or "24h" (24 hours display).
12h ↔ 24h
MODE
* Date and clock are acquired from GPS
signal; therefore, it is not necessary to
enter them.
29