Cateye Stealth evo CC-GL11 Instruction Manual
  1. Manuals
  2. Brands
  3. Cateye Manuals
  4. Bicycle Accessories
  5. Stealth EVO CC-GL11
  6. Instruction manual

Cateye Stealth evo CC-GL11 Instruction Manual

Hide thumbs Also See for Stealth evo CC-GL11:
Table of Contents

Advertisement

Quick Links

Enlarged version
CYCLOCOMPUTER CC-GL11
Instruction manual
Before using the computer, please thoroughly read this manual
and keep it for future reference.
* This PDF contains a link to YouTube.
When you click on the button "Watch a video", a message regarding security
appears.
Click the "Allow" to open a browser and play the video.
* YouTube videos and instruction manuals related to this product are subject to
change without notice.
For the latest edition of the instruction manual (PDF), visit the official CatEye
website.
* This manual has been prepared on the assumption that the user has sufficient
basic knowledge, including operation and terminology of PCs (Windows / Mac).
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
L'appareil est conforme à la réglementation FCC, section 15 et Industrie Canada RSS standard exempts de licence (s).
Son utilisation est soumise à deux conditions :
1. L'appareil ne doit pas provoquer d'interférences nuisibles, et
2. L'appareil doit supporter les interférences reçues, y compris les interférences empêchant son fonctionnement correct.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by CatEye Co., Ltd. may void the user 's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
1
066601231
Features of this unit
Measurement method
This unit is a cyclocomputer, having a GPS and acceleration sensor built-in, which can per-
form measurement by receiving GPS signal, without speed sensor.
Recording and viewing the trip route
ENG
Position information from GPS is recorded with measurement data during measurement.
The measurement data such as your route and altitude can be viewed as a trip on a map on
the site, by loading them into the dedicated software application "CATEYE Sync™" on your
PC, and then uploading to the special website "CATEYE Atlas™".
"CATEYE Atlas™" can be used as a database for your cycling life, where you can store the
trips measured using this unit or CATEYE INOU, a trip recorder with camera.
Icons used in this manual
• This manual indicates computer button operations as shown below.
Press the
Press the
for 2 seconds
Press the MENU button
MENU
• For explanatory purposes, in this manual red text/icons on the computer screen represent
flashing items.
button
Press the MODE button
MODE
button
Press the MODE button
for 2 seconds
MODE
1

Advertisement

Table of Contents
loading

Related Manuals for Cateye Stealth evo CC-GL11

Summary of Contents for Cateye Stealth evo CC-GL11

  • Page 1 PC, and then uploading to the special website “CATEYE Atlas™”. ”CATEYE Atlas™” can be used as a database for your cycling life, where you can store the trips measured using this unit or CATEYE INOU, a trip recorder with camera.

  • Page 2: Warning / Caution

    Proper use of the CatEye STEALTH 11 Warning / Caution Battery • Do not concentrate on the computer while riding. Ride safely! Follow these instructions to maximize the lithium-ion battery performance. • Mount firmly the bracket on your bicycle, and check periodically that it is not loosened.

  • Page 3: Description Of Computer And Its Parts

    Flashes while speed measurement is in progress. page 28). Daylight saving time icon * For information on how to set the daylight saving time, see “Clock setting” (when using CATEYE Sync™: page 23, when using the computer alone: page 25). Cradle Quick start...

  • Page 4: How To Install The Unit On Your Bicycle

    How to install the unit on your bicycle Cut the excess length of the band using scissors. Watch video Click the button, then a browser will open and a Caution: Round off the cut edge of the bracket strap to prevent (YouTube) video will be played back.

  • Page 5: Setting Up The Computer

    Then, you can set up quickly using your PC, to the following instructions. by changing the computer configuration using the special software application “CATEYE Sync™”. For details, see “Changing the computer configuration” (page 23).

  • Page 6: Select The Time Zone

    Time zone list Select the time zone Time Time City code City name City code City name difference difference In reference to the following “Time zone list”, select the code London Darwin +9.5 for the city nearest from your current location. Paris Sydney Athens...
  • Page 7 Select the daylight saving time You can set the daylight saving time when you are on Daylight Saving Time. Select ON or OFF. Setting Description Displays 1 hour faster than regular clock. Displays in regular clock. Daylight saving time icon Register the setting ON ↔...

  • Page 8: Screen Flow

    Screen flow GPS search screen (when the power is turned on) This unit has three screens: a GPS search screen, a measurement screen, and a standby screen. These screens are displayed alternatively according to GPS signal reception sta- When the power is turned on, the GPS search screen will appear, and the unit will start tus and bicycle movement.

  • Page 9: Standby Screen

    * If there is no button operation for 10 minutes while the GPS signal not received icon ( Changed GPS search screen Power OFF is flashing on the measurement screen, the unit automatically turns off. (Auto power off) automatically Changed by Power ON/OFF operating GPS signal may not be received, thus the unit may stop measurement or may not display...

  • Page 10: Starting/Stopping Measurement

    Measurement Starting/Stopping measurement Press the button to stop measurement STOP appears on the measurement screen, and measurement This unit is a sensor-less cyclocomputer using GPS. stops. Caution: Measurement requires an environment in which GPS signals can be re- Once measurement stops, press and hold the MODE button ceived.

  • Page 11: Switching Computer Function

    MODE * The night-time can be set to your needs. km, Average Speed cannot be For details, see “Night-time setting” (when using CATEYE Sync™: page 23, when using measured, while displaying “.E”. the computer alone: page 27). Reset the data.

  • Page 12: Resetting The Measurement Data And Generating The Trip Data

    For details, see “Resetting the trip distance-2” below. * The total distance (Odo) cannot be reset. * For information on how to upload to the CATEYE Atlas™, see “Uploading the measurement data (trip data)” (page 15). * The unit has a limited memory capacity. When the data volume exceeds the memory ca- pacity, any new data can no longer be stored.

  • Page 13: Setup Of Your Pc

    Setup of your PC At first, access the special website CATEYE Atlas™ to register as a member. Then, install CATEYE Sync™ to your PC (Windows/Mac). You can upload the trip data measured with this unit to CATEYE Atlas™, STRAVA™, TrainingPeaks™ and others, or change the computer configuration using your PC.

  • Page 14: Setting Cateye Sync

    For details, see “Changing the computer configuration” (page 23). * When using CATEYE INOU, click on [INOU] to start INOU Sync. When you use CATEYE INOU for the first time, download CATEYE Sync™ INOU from CATEYE Atlas™ to install it.

  • Page 15: Uploading The Measurement Data (Trip Data)

    Uploading trip data Save the trip data in the computer to your PC, and upload desired trip data to CATEYE Atlas™, STRAVA™, or TrainingPeaks™. * The trip data without the resetting operation cannot be recognized with CATEYE Sync™.

  • Page 16: Syncing All Activities

    Clear the check box for unnecessary trip data * You can check the upload destination by the color of the button. (Green: CATEYE Atlas™, Orange: STRAVA™, Blue: TrainingPeaks™) Upload button Destination of uploaded trip data * To upload specific trip data only or upload trip data to a service site other than the last one CATEYE Atlas™...

  • Page 17: Exporting The Trip Data

    Exporting the trip data Select the destination to save, and then click on [Open] You can export the trip data saved in CATEYE Sync™, and create a file. The file will be exported to the destination specified. Check any trip data on the data list screen, and then click on [Export] A dialog for selecting the file format appears.
  • Page 18 Select the file you want to load, and then click on [Open] CATEYE Sync™ The measurement data loaded into e-Train Data™ can be used with CATEYE Atlas™ and other services (STRAVA™ etc.) by importing it to CATEYE Sync™. Export the measurement data from e-Train Data™, and prepare a file * For information on how to export e-Train Data™, see the instruction manual for e-Train...

  • Page 19: Data Contained In The Trip Data

    * When exceeding any of the conditions above, “MEM FULL” appears flashing on the screen, and no new data can be recorded. Transfer the trip data to CATEYE Sync™ to secure the storage volume of the computer. Only when exceeding the maximum time for one trip, the...

  • Page 20: Reviewing, Editing And Sharing The Trip (What You Can Do With Cateye Atlas™)

    You can share the trip with your friends and other users, by editing the trip information uploaded to CATEYE Atlas™. Access CATEYE Atlas™ Access the website “CATEYE Atlas™” from your browser (http://www.cateyeatlas.com). Click on [Login here] Ride data * When you have not registered your membership, see “Mem- bership registration to CATEYE Atlas™”...

  • Page 21: Deleting The Gps Point

    Now, editing the trip information is completed. 1 Click on [Delete trip] on the trip information editing screen. 2 Click on [Delete]. * The CATEYE Sync™ trip data on your PC is not affected. * The deleted trip can be restored by re-uploading from CATEYE Sync™.
  • Page 22 Exporting to a GPX fil Export a general-purpose GPS data file from the trip. This can be used with other services, including Google Earth™. 1 Click on [GPX export] on the trip information editing screen. A confirmation message appears. 2 Click on [Export]. A GPX file is downloaded.

  • Page 23: Changing The Computer Configuration

    You can change the computer configuration in two ways. Click on [Settings] • Changing the setting with CATEYE Sync™ (below on this page) The setting screen appears. You can change the configuration easily from your PC application, with the computer connected to your PC with the cradle.
  • Page 24 Click on [STEALTH] to change the settings Setting items Description Tire circumfer- Before changing the settings, click on [Read] to load the settings of the computer. This is not used with this unit. ence You can enter the start value of the total distance, and add the trip distance to it.

  • Page 25: Changing The Settings Of The Computer Alone

    Changing the settings of the computer alone From “Selecting the speed unit” (page 28) Pressing the MENU button with the measurement screen displayed changes to the menu Clock setting screen. Various settings can be changed on the menu screen. * After you change the setting, be sure to press the MENU button to register it. Change the settings of the time zone, daylight saving time, and the * Leaving the menu screen without any operation for 1 minute returns to the measurement clock display format.

  • Page 26: Changing The Time Zone (Shortcut)

    Changing the time zone (shortcut) Time zone list Holding down the MODE button for 4 seconds with the menu top screen displayed returns Time Time City code City name City code City name the time zone to the previous one. Holding down it again returns to the original time zone. difference difference London...

  • Page 27: Night-Time Setting

    From “Clock setting” (page 25) From “Night-time setting” Night-time setting Setting the record interval Set the time when the backlight lights up. Set the second-scale interval to record the measurement data. * When you do not want to turn on the backlight throughout the * The maximum recording time / maximum time for one trip that day, set the start time and end time to the same hour.

  • Page 28: Setting The Middle Display

    From “Setting function display” (page 27) From “Entering the total distance” Selecting the speed unit Setting the middle display Select the middle display of the measurement screen. Select the speed unit (km/h or m/h). Changing Changing the settings CLK (Clock) km/h ↔...

  • Page 29: When The Operation Is Unstable

    When the operation is unstable When the computer displays incorrectly, perform the restarting operation to stabilize the operation. * Performing the restarting operation deletes any records under measurement. * We recommend that you perform the resetting operation to generate the trip data, before performing the restarting operation.

  • Page 30: Troubleshooting

    Troubleshooting The following troubles are not due to failure. See also “FAQ” in CATEYE Atlas™ (web) (http://www.cateyeatlas.com/qa/). Trouble Check Items Remedy Trouble Check Items Remedy Measurement cannot Measurement is paused. When the power is Remaining battery capacity is turned on, (bat- nearly zero.

  • Page 31: Optional Accessories

    Bracket Cradle (IF-CC01) For information on how to set the start/end time, see “Night-time set- ting” (when using CATEYE Sync™: page 23, when using the com- puter alone: page 27). The backlight lights up Is the start time of the...

  • Page 32: Specification

    Specification Upper 0.0 (3.0) – 105.9 km/h Battery Lithium-ion rechargeable battery Current speed display [0.0 (2.0) – 65.9 m/h] Charge and communication USB cradle 0:00 – 23:59 Approx. 5 hours [AM1:00 – PM12:59] Standard charging time (USB2.0) Clock (Both 12 and 24-hour modes can Middle be selected) Approx.

  • Page 33: Limited Warranty

    If the product fails to work due to normal use, CatEye will repair or replace the defect at no charge. Service must be performed by CatEye or an authorized retailer. To return the product, pack it carefully and enclose the warranty certificate (proof of purchase) with instruction for repair.

Table of Contents