2 HOW TO MAKE COPIES
Bypass copying on non-standard size paper
You can use non-standard size paper within the sizes shown on the
right.
1
Place the original on the original glass.
2
Move the paper holding lever toward the outside.
Place paper with its copy side down on the bypass
tray.
The height of the paper must not exceed the indicator on the side guides.
When you use more than one sheet of paper, fan the sheets well before placing them on the
bypass tray. Be careful not to cut your fingers when fanning.
Do not push paper into the entrance of the bypass feeder. This could cause a paper misfeed.
3
Align the side guides to the paper length. Move the
paper holding lever toward the equipment.
When paper is placed, the menu for bypass copying appears.
58
Bypass Copying
148 - 432 mm
( 5.8" - 17" )
100 - 297 mm
( 3.9" - 11.7" )
1
2