Registering Paper Size - Toshiba e-studio 2550c Copying Manual

1 BEFORE USING EQUIPMENT

Registering paper size

When you place paper for the first time or you replace the paper with that of a different size, you need to
register the size to this equipment.
When paper size is set to be detected automatically:
When [AUTO (mm)] or [AUTO (inch)] has been selected for the paper size, the following procedure is not
required. The paper size is set automatically.
1
Press the [USER FUNCTIONS] button on the control
panel.
2
Press the [USER] tab on the touch panel to display the user setting menu, and then
press [DRAWER].
3
Select the paper size on the touch panel.
1) Select the drawer in which you placed paper.
2) Select the paper size.
3) Press [OK].
To automatically detect the size of paper placed in a drawer:
Select [AUTO (mm)] when A/B format paper is placed and [AUTO (inch)] when LT format paper is
placed instead of selecting a specified paper size. The paper size is automatically registered to the
equipment with the automatic paper size detection function when paper is placed in this drawer.
22 Placing Paper