Outside Erase - Toshiba e-studio 2550c Copying Manual

Outside Erase

You can whiten a shadow-like dark part which has appeared outside of the copied image; this has been
caused by a gap between the original glass and the platen sheet. This function is called "outside erase". It is
useful when you place thick originals such as booklets on the original glass.
This function is disabled when you place originals on the RADF or you place them on the original glass
with the RADF or the Original Cover closed fully.
When this function is enabled, the automatic density adjustment is disabled. Adjust the density level
manually.
Originals with an intricate outer shape (e.g. an original with cut-out parts on its edge) may not be copied
properly because this function may not detect the border between the original and areas not belonging
to it.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Select the drawer for the desired paper size.
3
Press [OUTSIDE ERASE] on the EDIT menu.
Outside erase set
4 EDITING FUNCTIONS
No setting

Outside Erase

159