1.BEFORE USING EQUIPMENT
Registering paper size
When you place paper for the first time or you replace the paper with that of a different size, you need to register the size
to this equipment.
When paper size is set to be detected automatically:
When [AUTO (mm)] or [AUTO (inch)] has been selected for the paper size, the following procedure is not required. The paper size is
set automatically.
1
Press the [SETTING] button on the control panel.
2
Press the [USER] tab on the touch panel to display the user setting menu, and then
press [TRAY].
3
Select the paper size on the touch panel.
1) Select the tray in which you placed paper.
2) Select the paper size.
3) Press [OK].
To automatically detect the size of paper placed in a tray:
Select [AUTO (mm)] when A/B format paper is placed and [AUTO (inch)] when LT format paper is placed instead of
selecting a specified paper size. The paper size is automatically registered to the equipment with the automatic
paper size detection function when paper is placed in this tray.
1 BEFORE USING EQUIPMENT
Placing Paper
17