Yamaha XV19SX(C) Service Manual page 95

1. Clutch hose
2. Left handlebar switch lead
3. Right handlebar switch lead
4. Front brake hose
5. Throttle cable (decelerator cable)
6. Throttle cable (accelerator cable)
7. Horn 1 lead
1
8. Horn
9. Rear brake light switch lead
10. Rear brake light switch
A. Pass the left handlebar switch lead through the
grommet.
– –
B. 5 15 mm (0.20 0.59 in)
C. Fasten the rear brake light switch lead with a
plastic locking tie. Face the end of the plastic
locking tie inward, and then cut off the excess end
of the tie.
D. Fasten the rear brake light switch lead with a
plastic locking tie. Face the end of the plastic
locking tie downward, and then cut off the excess
end of the tie.
– °
E. 15 35
F. Pass the right handlebar switch lead through the
cutouts in the lead holder.
G. Do not pinch the right handlebar switch lead.
CABLE ROUTING (for XV19CS(C)/ XV19C(C))
2-68