Yamaha XV19SX(C) Service Manual page 403

8. Check the diode 2. (for XV19S(C)/
XV19M(C)/ XV19CTS(C)/
XV19CTM(C))
Refer to "CHECKING THE DI-
ODES" on page 7-81.
OK ↓
9. Check the starter relay.
Refer to "CHECKING THE RE-
LAYS" on page 7-79.
OK ↓
10.Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 7-71.
OK ↓
11.Check the engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 7-71.
OK ↓
12.Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 7-71.
OK ↓
13.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 7-71.
OK ↓
14.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 7-71.
OK ↓
15.Check the start switch.
Refer to "CHECKING THE
SWITCHES" on page 7-71.
OK ↓
16.Check the entire starting system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 7-7.
OK ↓
The starting system circuit is OK.
ELECTRIC STARTING SYSTEM
NG →
Replace the diode 2.
NG →
Replace the starter relay.
NG →
Replace the main switch.
NG →
The engine stop switch is faulty. Replace
the right handlebar switch.
NG →
Replace the neutral switch.
NG →
Replace the sidestand switch.
NG →
Replace the clutch switch.
NG →
The start switch is faulty. Replace the right
handlebar switch.
NG →
Properly connect or repair the starting sys-
tem wiring.
7-12