Removing The Front Bezel; System Feet; Removing The System Feet - Dell PowerEdge T430 Owner's Manual

3. bezel key
5. bezel tab (2)

Removing the front bezel

1. Unlock the bezel using the bezel keys.
2. Press the release latch at the top of the bezel.
3. Pull the top end of the bezel away from the system.
4. Remove the bezel by unhooking the bezel tabs from the slots at the bottom of the system.

System feet

The system feet provide stability to the system in the tower mode.

Removing the system feet

Prerequisites
NOTE: It is recommended that you remove the system feet only when you are converting the
system from the tower mode to the rack mode, or when you are replacing the system feet with the
wheel assembly.
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver ready.
3. Turn the system feet inward.
4. Lay the system on its side on a flat and stable surface.
Steps
Remove the screws securing the system feet to the base of the tower.
Safety instructions.
4. slot on the chassis (2)
6. bezel
51