Konica Minolta 7085/FORCE 85 Service Manual page 829

VI Kit VI-602 INSTALLATION PROCEDURE
I. Accessory parts
No. Name
1 Printer
relay board / 1
2 Printer
relay wiring / 2
3 TP Screw
(M3x4)
4 Outer fixing
screw
5 Mounting clamp
6 Plate spring
7 Cable tie
Shape Q'ty
1
1
1
2
2
4
1
E-1
II. Preparations
1. Always carry out installation of the VI-602 together
with the IP-602.
2. Before you start the installation procedure, turn
off the power switch of the IP-602 and the main
switch of the main unit, and make sure to
disconnect the power cord from the power point.
3. Before touching the printer relay board, touch with
your hand any metal part of the main unit in order
to discharge static electricity.
Caution 1
DO NOT touch with your hand any metallic parts of
the relay board.
Caution 2
Refer to the IP-602 Installation Procedure as the
Outer fixing screw and Cable tie are used during
installation of the IP-602.
Applied Machine: Konica 7085
13TL97010