Konica Minolta 7085/FORCE 85 Service Manual page 738

3. Remove the slot cover (one screw).
4. Install the KN-302 board in the PCI slot. Align the
front edge of the connector to the socket's slot and
insert the board firmly. When the board's connec-
tor is firmly inserted in the socket, make sure it is
not making contact with other devices on the board.
5. Use the screw that was taken out when removing
the slot cover to secure the KN-302 board.
6. Reinstall external cover (four screws).
7. When connecting with a network, install the ferrite
core includied in the KN-302 network board to the
cable.
E-2