Konica Minolta 7085/FORCE 85 Service Manual page 320

ADJUSTMENT
33 Finisher Stapling and folding stopper adjustment (FS-108BM/211 only)
adjust-
Folding stopper adjustment (FS-108BM/211 only)
34
ment
Cover sheet tray size adjustment (PI-108 only)
35
36 Trimmer stopper adjustment (TU-108 only)
Punch vertical position adjustment (PU-108/PZ-108 only)
37
Punch horizontal position adjustment (PU-108/PZ-108 only)
38
Punch registration loop adjustment (PU-108/PZ-108 only)
39
1st folding position adjustment (PZ-108 only)
40
2nd folding position adjustment (PZ-108 only)
41
42 Centering Adjustment
43 Paper up/down plate horizontal adjustment
44 Skew Adjustment
45 Tray Spring Pressure Adjustment
46 Paper Feed Height (Upper Limit) Adjustment
47 Pick-up Release Amount Adjustment
48
Alignment with drive unit
49 AC and DC drawer positioning
50 ADU gate gap adjustment
51 RADF Mountng Position Adjustment
52 RADF Hinge Spring Pressure Adjustment
53 RADF Skew Adjustment
54 Drum count reset
55 Fixing cleaning web count reset
56 Developer count reset
* When adjustments must be made in order of precedence, numbers will be shown in circles.
Cautions: Image control board replacement precautions
• When a damaged image control board is replaced, the memory board on this board must be used on
the new image control board.
Only when the memory board is damaged, use a new memory board. Since the new memory board
does not have adjustment data, the above adjustments are required. Before making the above
adjustments, make the "47-92(output)" setting to make the new memory board effective.
• After making any adjustment, make the "47mode-96(output ) setting" . After made the "47mode-
96(output )" setting, the adjustment data is saved.
• However, the "47mode -92" and -96" settings are protected to prevent them from careless operation.
In order to make "47mode -92" and -96" settings using the saved adjustment data, the protection
must be disabled. For the unprotection method, contact the service manager of the authorized dis-
tributor.
MODEL
7075
SERVICE HANDBOOK
1-94-1
1-94-1
1-94-2
1-94-2
36 1-94-3
1-94-3
1-94-4
1-94-4
1-94-5
1-107~108
1-109-1~111
1-112
1-113~114
1-114~116
1-117~118
1-119
1-123
1-120
1-37
25 1-37
1-37
REVISED EDITION
MANUAL
DATE
1 - 4
Sep. 2001
PAGE METHOD
1-4 REPLACEMENT