Evf System Adjustments; Function Of Each Button On Evf System; Adjustment Screen; Adjustment Items Of Evf System Adjustment - Sony DSC-F828 Service Manual

1-5.

EVF SYSTEM ADJUSTMENTS

1-5-1.

Function of Each Button on EVF System

Adjustment Screen

[EVF SYSTEM ADJUSTMENT]
Click the
Menu screen, and the "EVF SYSTEM ADJUSTMENT" screen in
Fig. 6-1-60 will appear.
[To Menu]
1 button
The Main Menu screen comes back.
[EVF Adjustment Start]
2
"EVF Adjustment" starts.
[Reset]
button
3
This button functions same as the Reset button of the camera.
[Release Data Setting]
4
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from "white"
to "red". When the data setting is cancelled, the button color
returns to "white".
(Use this button when an error occurred in the EVF adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
"white".)
1-5-2.

Adjustment Items of EVF System Adjustment

The adjustment items of EVF system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program executes the ad-
justment items if the EVF Adjustment Start button is clicked.
Button
Adjustment
Name
EVF Initial Data
Input
VCO adj.
EVF
Adjustment Bright adj.
Contrast adj.
V-COM adj.
White Balance adj.
DSC-F828
button on the Main
1
4 3
Fig. 6-1-60
button
button
Signal Page Address
70, 71,
8F
73 to 78,
7A, 7C
8F 73
Arbitrary 8F
75
8F 7C
8F 74
8F 78, 7A
Table 6-1-4
1-5-3.

Adjusting Method

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during EVF Adj.
2. EVF Initial Data Input
3. VCO Adj.
4. Bright Adj.
5. Contrast Adj.
6. V-COM Adj.
7. White Balance Adj.
8. Release of Data Setting during EVF Adj.
[Adjusting method]
2
[EVF Adjustment Start]
1) Click the
2) The Automatic Adjustment Program executes the items from
"1. Data Setting during EVF Adj." to "6. V-COM Adj.".
3) Upon completion of "6. V-COM Adj.", "7. White Balance Adj."
is executed. The following message is displayed, and then check
that EVF screen is not colored.
If colored, change the data of page: 8F, address: 78 and 7A on
the SEUS Operation screen to adjust so that the EVF screen is
not colored.
[OK]
4) If the button is clicked, "8. Release of Data Setting dur-
ing EVF Adj." will be executed.
5) Upon successful completion of all items the EVF adjustment,
the following message is displayed. Click the
6-25
button.
Fig. 6-1-61
[OK]
Fig. 6-1-62
button.