Camera System Adjustments; Mhz Origin Oscillation Check (Vc-359 Board) - Sony DCR-HC65 Adjusting Manual

1-3.

CAMERA SYSTEM ADJUSTMENTS

Before perform the camera system adjustments (except for "66MHz
Origin Oscillation Check"), check that the specified values of
"VIDEO SYSTEM ADJUSTMENTS" are satisfied.
And check that the data of page: 0, address: 10 is "00". If not, set
data: 00 to this address.

1. 66MHz Origin Oscillation Check (VC-359 board)

Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color will
become inconsistent.
Subject Not required
Measurement Point Pin <zzb> of IC5201 (VCK) (R5205)
Measuring Instrument Frequency counter
Specified Value f=13500000 ± 272Hz
Note: The data of page: 0, address: 10 must be "00".
Switch setting:
MODE ......................................................... CAMERA-TAPE
Adjusting method:
Check that the frequency (f) satisfies the specified value.
VC-359 board (SIDE A)
IC5201
R5205
Fig. 6-1-6.
6-21
DCR-HC65