Color Shade Check - Sony DSC-F828 Service Manual

5. Color Shade Check

Compensate the color shade.
Mode
Subject
Adjustment Page
Adjustment Address
Note 1: Check that there are no reflections on the clear chart.
Switch setting:
Mode dial ............................................ STILL (P AUTO) ( P )
ZOOM .................... WIDE end (Turn the zoom ring to "28")
MACRO ............................................................................. ON
FOCUS ................................................................... MANUAL
Adjusting method:
1) Start the DSC-F828 C1 MATRIX ADJ on the PC.
[Connect]
2) Click
screen. If the connection is normal, the DSC-F828 C1 MA-
TRIX Adjustment screen will be as shown in bellow, indicat-
ing the "connected" state
3) Set up the switches of camera as above-mentioned.
4) Check that the picture frame is the standard picture frame.
[Color Shading Adjustment]
5) Click
TRIX Adjustment screen.
6) Color shading adjustment is performed automatically.
DSC-F828
STILL (P AUTO) ( P )
Clear chart (PTB-1450)
(Standard picture frame)
About 6cm from the front of the lens
6F
06, 07
on the DSC-F828 C1 MATRIX Adjustment
on the DSC-F828 C1 MA-
Fig. 6-1-28
Fig. 6-1-29
7) When the "Completion of adjustment" message is displayed.
[OK]
Click the button.
6-17
Fig. 6-1-30