1. Manuals
  2. Brands
  3. La Crosse Technology Manuals
  4. Clock Radio
  5. WS-8007U
  6. Instruction manual

La Crosse Technology WS-8007U Instruction Manual

433 mhz radio controlled moon phase clock
Hide thumbs Also See for WS-8007U:
Table of Contents

Advertisement

Quick Links

WS-8007U
433 MHz
Radio Controlled Moon Phase Clock
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for La Crosse Technology WS-8007U

Summary of Contents for La Crosse Technology WS-8007U

  • Page 1 WS-8007U 433 MHz Radio Controlled Moon Phase Clock Instruction Manual...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Buttons Time Zone Setting DST (Daylight Saving Time) Setting Language Selection Time Setting Calendar Setting 12/24-Hour Setting Selecting °F or °C Features &...

  • Page 3: Inventory Of Contents/ Additional Equipment

    3) If there is no WWVB reception, manually set the time and date (see instructions in the Program Mode section). 4) Program the settings. 5) Mount the WS-8007U in a suitable location where WWVB signals can be received. DETAILED SET-UP GUIDE BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free.

  • Page 4: Program Mode

    1) Observe the correct polarity, and install 2 AA batteries. 2) Replace the battery cover. Note: After the batteries have been installed a tone will sound, and all the LCD’s (Liquid Crystal Display) will briefly light up. Then the indoor temperature, the date as “1/ 1”, the weekday as “MON”, and the Moon Phase will be displayed.

  • Page 5: Function Buttons

    FUNCTION BUTTONS There are 4 function buttons located on the backside of the Moon Phase Clock. The function buttons are labeled: “SET”, “+”, “ALM” and “SNZ”. II) TIME ZONE SETTING 1) Hold down the “SET” button for 2 seconds, the default setting “-5EST” will flash in the Date LCD.

  • Page 6: Time Setting

    2) Press and release the “+” button to select the desired language. There are 3 languages to select from: English French Spanish 3) Press and release the “SET” button to confirm the language setting and to advance to manually set the time. V) TIME SETTING Note: When the WWVB signal is found, that time will over-ride the manually set time.

  • Page 7: 12/24-Hour Setting

    18) Press and release the “SET” button to confirm the calendar settings and to advance to select either 12 or 24-hour time display. VI) 12/24-HOUR SETTING 1) The “12” hour time display will be flashing in the time LCD. 2) Press and release the “+” button to toggle between 12 and 24 hour time. Note: 12-hour uses AM/PM, 24-hour is also known as “military”...

  • Page 8: The Alarm

    5) Press and release the “+” button to set the alarm minutes. 6) Press and release the “ALM” button to confirm and to exit the alarm setting mode. Note: The alarm will be automatically set to sound when exiting the alarm- setting mode, indicated by the alarm icon to the right of the time- (((•))) B) ACTIVATING/DEACTIVATING THE ALARM 1) The alarm will be automatically set to sound when exiting the alarm-setting...

  • Page 9: Indoor Temperature

    The moon phase clock is programmed with all moon phases and corresponding dates from the year 2000 until 2019. IV) INDOOR TEMPERATURE The Indoor Temperature appears on the right side of the Date LCD. The temperature is checked every 10 seconds, and updated whenever there is a change. MOUNTING Hanging Holes Function Buttons...

  • Page 10: Maintenance & Care

    Moon phase is incorrect. Problem: Solution: 1) Check the calendar data. 2) Check batteries. 3) Contact La Crosse Technology. Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual.

  • Page 11: Specifications

    La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the moon phase clock in for repairs, contact La Crosse Technology. The moon phase clock will be repaired or replaced with the same or similar model.
  • Page 12 For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.lacrossetechnology.com FCC ID: OMO-01RX (receiver) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1.

Table of Contents