Paper Specifications - Kyocera FS-6700 User Manual

Paper Specifications

The following table summarizes the basic paper specifications. Details are given on the following
pages.
Table B.1. Paper Specifications
Weight
Thickness
Dimensional accuracy
Squareness of corners
Moisture content
Pulp content
Note
When using paper thinner than 64 g/m
the proper setting (given below) for that paper on the Paper type menu found on the Mode
Select Menu.
2
Thin: Paper 64 g/m or less
2
Normal: 64 to 90 g/m
2
Thick: 90 g/m or more
Extra thick: OHP sheets, postcards, or other special paper.
Note that depending on the properties of the paper the appropriate mode may differ from that
given above. Use the setting that gives the best print quality.
Kyocera bears absolutely no responsibility for accidents resulting from the use of inappropriate
paper which does not meet the specifications listed above. For paper, contact the licensed dealer
of Kyocera from which you purchased the printer.
2
60 to 90 g/m (16 to 24 lbs./ream)
0.086 to 0.110 mm (3.4 to 4.3 mils)
0.7 mm ( 0.0276 inches)
90 0.2
4% to 6%
80% or more
2
or thicker than 90 g/m
Paper Selection
Appendix B
2
with this printer, be sure to make
B-3