Message Display - Kyocera FS-6700 User Manual

Message Display

The message display gives information in the form of short messages. The seven messages listed
below are displayed during normal warm-up and printing.
Message
The printer is self-testing after power-up.
Self test
The printer is warming up and is not ready.
Please wait
The printer is ready to print.
Ready
The printer is receiving data, generating graphics, reading an memory
Processing
card, or printing.
The printer is waiting for a command that says the job is over before
Waiting
printing the last page. Pressing the FORM FEED key allows you to
obtain the last page immediately.
The printer is in Sleep mode. The printer wakes from Sleep mode
Sleeping
whenever a key on the control panel is pressed, the cover is opened or
closed, or data is received. The printer then warms up and goes online.
(The time that it takes the printer to enter Sleep mode depends on the
Sleep Timer setting.)
The printer prints the last page after a waiting period.
FormFeed
TimeOut
Other messages appear when the printer needs the operator's attention as explained in Chapter 5.
Chapter 2 Operating the Laser Printer
Meaning
2-3