Modifying And Deleting - Kyocera FAX SYSTEM Operation Manual

Section 2 Fax Operation (Various Functions)
6. Touch the "Next" key.
7. Enter the desired name for the chain dial key. (Maximum 20
characters)
* In order to enter characters, refer to "Entering Characters" on
page 1-23.)
8. Check the registered information. If you want to change any portion
of it, touch the key that corresponds to the desired item and
change the information as desired.
(Inch)
(Metric)
9. To register this chain dial key with the entered information as is,
touch the "OK" key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue registering other one-touch keys, repeat
steps 3 through 9.
10. Once you are finished registering chain dial keys, press the Reset
key.
2-8

(2) Modifying and Deleting

* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the "Register" ["Registration"] key. The Registration Select
screen will appear.
2. Touch the "Dial" key.
(Inch)
(Metric)
3. Press the speed-dial key (chain dial key) containing the information
you want to modify or delete.
* If that key is not displayed, use the "M" and/or "L" cursor keys to
switch to the screen that displays the key that you want.
(Inch)
(Metric)
4. If you want to delete the registered chain dial key, touch the
"Delete" key and then go to the next step.
If you want to modify the registered information, touch the "Change
contents" key and then go directly to step 6.