Dialing; Printing Out A Group Dial List - Kyocera FAX SYSTEM Operation Manual

(3) Dialing

* You CANNOT use group dial keys in combination with chain dial
keys.
* You can use group dial keys not only for standard transmission, but
also for such operations as Broadcast Transmission and Polling
Reception.
1. If the operation involves the transmission of documents, set the
documents you want to transmit.
2. If you want to change the transmission conditions, such as the
resolution and contrast, touch the "TX setting" key. If you do NOT
want to change the current conditions, go directly to step 5.
3. Touch the key that corresponds to the desired item and change the
information as desired. (To change each transmission condition,
refer to pages 1-16 and 1-17.)
4. Once you are finished changing transmission conditions, touch the
"One touch destinat." key.
5. Touch the group dial key under which the desired fax numbers are
registered.
(Inch)
(Metric)
6. Press the Start key.
The transmission operation will begin automatically.
Section 4 Other Features of this Fax

(4) Printing Out a Group Dial List

Print out this list in order to check the contents of group dial keys
currently registered in this fax, such as the registered fax numbers
and the group name.
* If there are no group dial keys registered in this fax, a Group Dial
List will not be printed out.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1. Touch the "Print Report" key. The Report Select screen will appear.
(Inch)
(Metric)
2. Touch the "Group dial List" key.
(Inch)
(Metric)
3. To print out a Group Dial List, touch the "Yes" key. A Group Dial List
will be printed out.
4-25