Connect To Wi-Fi From Wireless Device - NETGEAR BigPond Wi-Fi 4G Advanced II AirCard 790S User Manual

Connect to Wi-Fi from Wireless Device

You can connect up to 15 wireless devices (such as smartphones, laptops, tablets, digital
cameras, printers, gaming consoles, and digital picture frames) to your hotspot network. For
information about setting connections for main Wi-Fi and guest Wi-Fi networks, see
Maximum Number of Connected Devices
You can add a wireless device to your Wi-Fi network manually. If the device you are adding is
WPS enabled, you can use the WPS method to connect the device without using the Wi-Fi
password.
Connect with the Wi-Fi Password
1. On the wireless device, view the list of available Wi-Fi networks.
2. Connect to the network that corresponds to your hotspot network as displayed on the
touchscreen.
3. When prompted, enter the Wi-Fi password for your hotspot network.
The Wi-Fi password displays on the hotspot touchscreen. If the screen is turned off, press
and quickly release the Power key to wake the hotspot.
Add a WPS-Enabled Device
You can add a WPS-enabled Wi-Fi device to your Wi-Fi network without a Wi-Fi password,
using the hotspot web page or the touchscreen.

To add a WPS-enabled Wi-Fi device from the touchscreen:
1. To wake up the device, press the Power key.
2. Tap the Home ( ) button.
BigPond Wi-Fi 4G Advanced II
on page 35.
10.0.0.138Use Your Mobile Hotspot
28
Set the