How Do I Turn The Hotspot Off; How Do I Find Out How Many Users Are Connected To My Hotspot's Wi-Fi Networks; Powered On; How Do I Find My Computer's Ip Address - NETGEAR BigPond Wi-Fi 4G Advanced II AirCard 790S User Manual

How do I turn the hotspot off?

Press and hold the Power key for a few seconds.
How do I find out how many users are connected to my
hotspot's Wi-Fi networks?
The number on the Wi-Fi icon on the hotspot's touchscreen is the number of users (or
devices) connected to your Wi-Fi network. A list of connected devices appears in the hotspot
Connected Devices section. For more information about the devices or users connected to
your network, see
The touchscreen is not lit. How do I know if the hotspot is
still powered on?
The touchscreen dims to save energy. The LED continues to flash slowly to indicate that the
mobile hotspot is still powered on. To wake up the touchscreen, press and quickly release the
Power key.

How do I find my computer's IP address?

The steps for finding your computer's IP address depend on the operating system. If your
device runs an operating system not listed here, see the appropriate operating system
documentation.

To find the IP address on a Windows 7 , Windows Vista , or Windows XP device:
1. Open the command prompt window:
a. Select Start > Run.
b. Enter cmd or command and click the OK button.
2. At the command prompt, enter ipconfig and press the Enter key.
3. Write down the IP address for the entry that relates to the wireless network connection.
The IP address might be listed under IPv4 Address or something similar.

To find the IP address on a Windows 8 device:
1. In the Charms bar, click the Search icon.
2. Select Command Prompt.
3. At the command prompt, enter ipconfig and press the Enter key.
4. Write down the IP address for the entry that relates to the wireless network connection.
The IP address might be listed under IPv4 Address or something similar.
BigPond Wi-Fi 4G Advanced II
View or Block Connected Users
Frequently Asked Questions
on page 37.
95