Other Modes
Selecting the Message Language
ADVANCED OPERATION GUIDE
The modes described in the following pages can be accessed in the Others
submenu. To enter the Others submenu, press
displayed.
The following submenus can be displayed by pressing
•
Message Language Selecting
•
Automatic Form Feed Timeout Setting
•
Sleep Timer Setting
•
Received Data Dumping
•
Restart Printer
•
Resource Setting
•
Alarm (Buzzer) Setting
•
Auto Continue Setting
•
Finishing
•
Service Menu (for service personnel)
You can select the language of the messages on the message display by
following the procedure given below.
1
Press [MENU].
2
Press
or
repeatedly until Others >
appears.
3
Press
.
4
Press
or
repeatedly until >MSG
Language appears. The default message
language is English.
5
To change the language, press [OK]. A
blinking question mark (?) appears.
6
Press
. The display cycles through the available selections in the
following order (
English
Francais
Deutsch
Italiano
Nederlands
Español
Português
cycles in the reverse order):
Using the Operation Panel
while Others > is
and then
or
Others
>MSG Language
English
>MSG Language
? English
2-87
.
>