Special Paper - Kyocera FS 9530DN Advanced Operation Manual

Special Paper

ADVANCED OPERATION GUIDE
This section explains printing on special paper. The page printer can use
the following types of special paper. In this case, set the media type
according to the table below.
Paper type to be used
Colored paper
Preprinted paper
Overhead projector
transparencies
Postcards
Envelopes
Label
When using the above types of paper, be sure to use products that are
specified for use with photocopiers and/or page printers. Feed paper other
than colored paper or preprinted paper from the MP (multi-purpose) tray.
Use paper that is sold specifically for use with copiers (heat-fusing type).
Label paper and envelopes should not be placed in the cassette.
Since the composition and quality of special paper vary considerably,
special paper is more likely than white bond paper to give trouble during
printing. No liability will be assumed if moisture, etc., given off in printing on
special paper causes harm to the machine or operator.
NOTE:
Before purchasing any type of special paper, test a sample on the
printer and check that print quality is satisfactory.
Specifications for each type of special paper are given below.
Handling Paper
Media type to be selected
Color
Preprinted
Transparency
Cardstock
Envelope
Labels
1-9