Combining Modes; Making Copies With The Sheet Copy Mode - Kyocera KM-6230 Instruction Handbook Manual

2 Combining modes

The available mode combinations will differ depending upon the type of originals being used and type of copies that you want to make.
See the following table. The circle (" ") indicates the possible combinations.
"1 sided"copy
"2 sided"
original
"Book"
"2 sided"
original
copy
"1 sided"
original
"2 sided"
original
"2 pages"
copy
"Book"
original
POINT OF INFORMATION
• If you combine the cover and insert modes when making two-sided copies, the available location for insert sheets may be limited only to even or odd
page numbers depending on the type of cover mode that you select.
• If you combine the insert and chapter modes, the settings you make will affect the same page. It is not possible to specify locations for insert sheets
and chapter pages separately.
"Cover" "Insertion"

3 Making copies with the sheet copy mode

1. Touch the "Added" key.
The function select screen will appear.
2. Touch the "Inserts" key. (If that key is not displayed, touch the " " key or the " " key until
it is displayed.)
The sheet copy mode set-up screen will appear.
3. Select the type of finished copies that you want to make by touching either the "2 sided",
"2 pages" or "1 sided" key.
* If you selected "2 sided", go to the next step.
If you selected "2 pages", go to step 6.
If you selected "1 sided", go to step 8.
Section 5 OTHER CONVENIENT FUNCTIONS
"Cover+
"Chapter"
Insertion"
"Cover+ "Insertion+
Chapter" Chapter"
"Cover+
Insertion+
Chapter"
5-10