Automatic Recording (Auto Rec); Enabling Automatic Recording; Automatically Adding Marks When Recording (Mark) - Tascam DR-100 Owner's Manual

Automatic recording (AUTO REC)

This function allows the unit to respond to input
sound levels and start and pause recording,
as well as set marks and create new files, for
example.
This function is convenient for recording only
when people are speaking during meetings,
creating marks for finding the starts of songs and
dividing files after recording, and automatically
dividing files.
MODE
MARK
Automatically adds marks during recording
PAUSE
Automatically pauses during recording
TRK INC
Automatically creates new files during recording
START LEVEL
Signal is judged to have been input when it
exceeds this level
END LEVEL
Signal is judged to have stopped when it becomes
less than this level
END DELAY
Time that recording continues after the signal
level becomes less than the
NOTE
• If you press the AUTO key when recording or in
recording standby, the current AUTO REC setting
can be checked.
• When AUTO REC is on, the RECORD [
blink more rapidly than usual In recording standby.
• Overdub recording is not possible when using the
AUTO REC function.
END LEVEL
] key will
º
6–Recording

Enabling automatic recording

When the input signal exceeds the
recording begins automatically.
NOTE
The MODE setting does not affect this function.
1 Press the key to open the
AUTO
2 Set the value of the
START LEVEL
3 Press the key to return to the Home
HOME
Screen.
4 Press the ( ) key while holding down
RECORD º
the key to put the unit into recording
AUTO
standby.
Recording starts automatically when the input
signal exceeds the
START LEVEL
NOTE
Press the STOP ) key to stop automatic recording.
(ª
Automatically adding marks when
recording (MARK)
The unit can be set to automatically add marks
to files during recording after they become less
than the setting and the
END LEVEL
passes. Marks can also be automatically added
when the input signal exceeds the
setting again.
1 Press the key to open the
AUTO
2 Set the item to
MODE MARK
3 Set the value of the
END LEVEL
4 Set the value of the
START LEVEL
5 Press the key to return to the Home
HOME
Screen.
6 Press the ( ) key while holding down
º
RECORD
the key to put the unit into recording
AUTO
standby.
Recording starts automatically when the input
signal exceeds the
START LEVEL
NOTE
• Press the STOP ( ) key to stop automatic recording.
ª
• You can also add marks manually. (
marks manually to a recording" on page 30.)
START LEVEL
screen.
AUTO REC
item.
.
time
END DELAY
START LEVEL
screen.
AUTO REC
.
item.
item.
value.
See "Adding
29
TASCAM DR-100