Getting Started; Location; Setting Up - BT EDGE 2500 User Manual

Hide thumbs Also See for EDGE 2500:
Table of Contents

Advertisement

Getting started

Location

You need to place your BT Edge 2500 within 2 metres of
the mains power socket and telephone socket so that the
cables will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference.
Your BT Edge 2500 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it
as high as possible ensures the best signal.

Setting up

1. Insert the 2 x AAA NiMH batteries supplied into the
. Slide the battery compartment into place
handset
1
1
BT Edge 2500 – Issue 2 – Edition 1 – 25.08.05 – 7032
2
WARNING
Do not place your BT Edge 2500
in the bathroom or other humid
areas.
Handset range
The BT Edge 2500 has a range of
300m outdoors when there is a
clear line of sight between the base
and the handset. When there is no
clear line of sight between the
handset and the base, e.g. the
base is indoors and the handsets is
either indoors or outdoors, the
range could be reduced to 50m.
Thick stone walls will severely
affect the range.
Signal strength
The
symbol on your handset
indicates when you are in range.
When you are out of range a beep
.
2
will sound every minute.
IMPORTANT
Do not connect the telephone line
until your handset is fully charged.
The base station must be plugged
into the mains power at all times.
Which socket?
Power socket
Telephone line socket
7

Advertisement

Table of Contents
loading

Table of Contents