Table of Contents
Advertisement
Additionally, if you have purchased a BT Edge 2500
multiple pack.
For each additional handset and charger:
1. Connect the power adaptor to the charger and switch on.
2. Insert the 2 x AAA NiMH batteries supplied into
the handset.
3. Place the handset on the charger and charge for at
least 24 hours. The red charging light will come on.
Your BT Edge 2000 additional handset comes pre-
registered to the base. The handset number will be
shown on the display.
Your BT Edge 2500 is now ready to use.
BT Edge 2500 – Issue 2 – Edition 1 – 25.08.05 – 7032
Getting started
9
Advertisement
Table of Contents
