Connecting To A Switchboard; Insert A Pause; Recall - BT EDGE 2500 User Manual

Hide thumbs Also See for EDGE 2500:

Table of Contents

General information

Connecting to a switchboard

This product is intended for use within the UK for

connection to the public telephone network and

compatible switchboards, which support tone and pulse

dialling and timed break recall.

If in doubt please consult your service provider.

Inserting a pause

With some switchboards, after dialling the access code

you may have to wait for a moment while the

switchboard picks up an outside line so you will need to

enter a pause in the dialling sequence.

Press

to insert a pause (

telephone number.

You may also need to enter a pause when storing

international numbers or charge card numbers.

You may need to use the recall function if you are

connected to a switchboard/PBX (Private Branch

Exchange), contact your PBX supplier for further

information. The recall function is set to timed break

recall and is also used for BT Calling Feature.

BT Edge 2500 – Issue 2 – Edition 1 – 25.08.05 – 7032

) before entering the

A pause would normally be used

when storing a telephone number

in the directory or inserted when

pre-dialling.

Table of Contents