Dial Mode; Changing The Base Pin Code - BT EDGE 2500 User Manual

26 26 Base settings
Default (original setting) is Tone.
Default PIN is 0000
Please note that when ? is
displayed you must enter the digits
using the keypad before selecting
OK.
BT Edge 2500 – Issue 2 – Edition 1 – 25.08.05 – 7032

Dial mode

The available settings are tone and pulse.
1. Press
select OK
2. Press
OK option.
3. The current setting is highlighted. Press
highlight the dial mode you require.
4. Select
5. Press and hold
Change the base PIN
Your BT Edge 2500 has a base PIN code which you will
need to change some of the base settings. You may wish
to change this to prevent unauthorised changes to your
settings.
1. Press
select OK
2. Press
OK option.
3. PIN code?
(default
or until Base Settings
option.
or until Dial Mode
OK option and you will hear a confirmation tone.
to exit and return to standby.
or until Base Settings
option.
or until PIN code
is displayed. Enter your current 4 digit code
0000 ) and select OK
is displayed then
is displayed then select
or
is displayed then
is displayed then select
option.
to