Install Optional Equipment; Install A Large Output Hopper - DataCard SD260 Installation And Administration Manual

Install Optional Equipment

You can install additional equipment on the printer depending on your
requirements.

Install a Large Output Hopper

The output hopper included with the printer holds about 25 0.030 in. (0.762 mm)
cards. The printer also can be used with an optional large output hopper that
holds up to 100 cards.
The large output hopper kit includes two base sections and the large output
hopper. The two base sections are identical, with hooks (marked by green circles)
that attach to the bottom of the printer. To assemble the base, arrange the base
sections back to back, as shown.
Large Output
Hopper
You can remove the standard hopper and attach the large output hopper without
using tools.
8
You cannot install the large output hopper on the SD460 system. A 100‐card
laminator output hopper is standard on the SD460 system.
Base Sections
Installation