Tracvision L2 Components; Integrated Receiver/Decoder (Ird); Materials Provided With Tracvision L2 - KVH Industries TracVision L2 Owner's Manual

Kvh industries satellitetelevision installation instructions user's guide technical manual tracvision l2
Table of Contents

Advertisement

A Guide to TracVision L2
On-screen messages are not
available with a DISH Network IRD.
Before you can start watching
satellite TV using your TracVision
antenna, you will need to activate
your IRD. Refer to
Section 2.4,
"Activating the IRD,"
for more
details.
TracVision L2 Packing List
Cables for the TracVision L2 are
stored beneath the antenna unit
during shipping.
1-2

1.2.1 TracVision L2 Components

The antenna unit includes the antenna positioning mechanism,
signal front end, power supply and control elements. These
elements include antenna drive controls and mechanisms, the
cable wrap subassembly, antenna gyro sensor, power
conditioning and regulating circuits, and the RF detector. The
antenna is a parabolic dish mounting a dual-output low noise
block (LNB) converter with built-in preamplifier. A molded ABS
radome encloses the baseplate and is secured in place with
standard fasteners. Connectors on the back of the baseplate join
the power, signal, and control cabling from units inside the
vehicle.

1.2.2 Integrated Receiver/Decoder (IRD)

The IRD (purchased separately) receives satellite signals from the
antenna unit for signal decoding, processing, and channel
selection, and sends the signals to the TV set for viewing. In
addition, messages can be sent from the IRD to the antenna unit
and messages can be received from the antenna unit for display
on the television screen. The IRD also provides the interface for
the user to activate authorization for reception. Please refer to the
User's Manual provided with your selected IRD for complete
operating instructions.
1.3
Table 1-1 lists the units, cables, and materials packed in the
TracVision L2 package by name and KVH part number.
Table 1-1
Component
Antenna Unit
RF Cable (28 ft)
Data/Power Cable (28 ft)
IRD Ground Wire (50 ft)
Kitpack*
Installation and Operation Manual
* A complete listing of kitpack contents is provided in
Materials Provided with
TracVision L2
KVH Part No.
01-0225-16
32-0417-28
32-0730-28
32-0583-50
72-0125
54-0195
Table
2-2.

Advertisement

Table of Contents
loading

Table of Contents