Tracvision S2 Components; Integrated Receiver/Decoder (Ird); Materials Provided With Tracvision S2 - KVH Industries TracVision S2 Owner's Manual

Kvh industries satellitetelevision owner's manual installation instructions user's guide technical manual tracvision s2
Table of Contents

Advertisement

A Guide to TracVision S2
On-screen messages are not
available with a DISH Network IRD.
Before you can start watching
satellite TV using your TracVision
antenna, you will need to activate
your IRD. Refer to
Section 2.4,
"Activating the IRD,"
for more
details.
TracVision S2 Packing List
Cables for the TracVision S2 are
stored beneath the antenna unit
during shipping.
1-2

1.2.1 TracVision S2 Components

The antenna unit includes the antenna positioning mechanism,
signal front end, power supply and control elements. These
elements include antenna drive controls and mechanisms, the
cable wrap subassembly, power conditioning and regulating
circuits, and the RF detector. The antenna is a parabolic dish
mounting a dual-output low noise block (LNB) converter with
built-in preamplifier. A molded ABS radome encloses the
baseplate and is secured in place with standard fasteners.
Connectors on the back of the baseplate join the power, signal,
and control cabling from units inside the vehicle.
1.2.2 Integrated Receiver Decoder (IRD)
The IRD (purchased separately) receives satellite signals from the
antenna unit for signal decoding, processing, and channel
selection, and sends the signals to the TV set for viewing. In
addition, messages can be sent from the IRD to the antenna unit
and messages can be received from the antenna unit for display
on the television screen. The IRD also provides the interface for
the user to activate authorization for reception. Please refer to the
User's Manual provided with your selected IRD for complete
operating instructions.
1.3
Table 1-1 lists the units, cables, and materials packed in the
TracVision S2 package by name and KVH part number.
Table 1-1
Component
Antenna Unit
RF Cable (28 ft)
Data/Power Cable (28 ft)
IRD Ground Wire (50 ft)
Kitpack*
Installation and Operation Manual
* A complete listing of kitpack contents is provided in
Materials Provided with
TracVision S2
KVH Part No.
01-0225-17
32-0417-28
32-0730-28
32-0583-50
72-0125
54-0196
Table
2-2.

Advertisement

Table of Contents
loading

Table of Contents