Manual Positioning Commands - KVH Industries TracVision L2 Owner's Manual

A Guide to TracVision L2

Manual Positioning Commands

F-2
F.2
To execute the following commands, first put the antenna unit in
idle mode by typing HALT and pressing "ENTER." Positioning
commands may be entered after the antenna comes to rest.
Help on Parser Commands
Table F-2
Function:
Command:
Argument:
Response:
Azimuth Angle
Function:
Command:
Argument:
Response:
Elevation Angle
Function:
Command:
Argument:
Response:
Azimuth CW Step
Function:
Command:
Argument:
Response:
Manual Positioning Commands
lists parser commands
HELP
none
print a list of all parser commands
commands a manual azimuth angle that the
mechanism moves to
AZ,xxxx (range is 0000-3599)
desired azimuth angle of the mechanism
relative to vehicle reference, or baseplate fwd,
º º
000 -359.9 (vehicle-referenced)
echoes the command; mechanism moves at a fixed
velocity
commands a manual elevation angle that the
mechanism moves to
EL,xxx (range is 100-700)
desired elevation angle of the mechanism relative to
up, or external sensor attitude reference, 10.0
º
70.0
echoes the command; mechanism moves at a fixed
velocity
commands a 0.1 deg CW manual step in azimuth
angle
6
none
echoes the command
º
-