KVH Industries KVHTRACVISION G4 Technical Manual page 46

Connecting the GyroTrac Sensor Cable
1. Connect the connectorized end of the sensor cable
to the GyroTrac sensor module. Twist until locked
in place.
Sensor Cable
Connector
2. Connect the other end of the sensor cable to the
blue ADCU terminal strip connector as shown in
Figure 2-25.
13 14
White/Green
White/Blue
Blue/White
White/Orange
Orange/White
Green/White
54-0147
Blue Label
15 16 17 18 19 20 21 22 23
Figure 2-24
GyroTrac Sensor Connector
Figure 2-25
Sensor Cable to ADCU Wiring
24
Installation
33